BERTOS SMOOTH GAS GRIDDLES ON CABINET
Worktop and front panels made of AISI 304 stainless steel. Inside made of stainless steel. Tubular flame burners of a large surface for a greater uniformity of heat distribution. Regulation of the supplied power by a continuous operation tap. Pilot flame and thermocouple safety valve. Piezoelectric ignition button with rubber protection. Maximum temperature over 300 °C. Smooth plate in thick satin finish steel occupying the entire worktop surface with a flush splashguard. Two zones with separate controls for an independent and perfect regulation of temperature. Slightly inclined cooking surface with a largely sized drain hole and conveyor to a proper container. Large compartment completely in steel.
.Model: G9FL8M-2
.SMOOTH GAS GRIDDLES ON CABINET
.Surface area: 796 x 667 mm
.Gas power: 20 KW
.Dimensions: 80L x 90D x 90H cm
.Weight: 111 Kg
.Made in Italy (Bertos Brand)
Related products
BERTOS 150 L GAS BOILING PAN WITH DIRECT HEATING
Worktop and front panels made of AISI 304 stainless steel. Inside made of stainless steel.AISI 304 stainless steel cooking container with 15/10 thickness, AISI 316 stainless steel bottom with 20/10 thickness. Direct heating generated by tubular stainless steel burners with optimized combustion, with thermocouple safety valve and protected pilot flame. Piezoelectric ignition with rubber protection. Hot and cold water taps on the worktop with an articulated spout for filling and washing the container. 2” draining tap of chromed brass with athermic handle. Temperature regulation by means of a handle tap to adjust the water level.
BERTOS 80 L GAS TILTING BRATT PANS
Internal and external frame completely made of stainless steel, external sides with Scotch Brite finishing.Cover fixed on a self-balanced hinge from AISI 304 stainless steel with a very thick handle from AISI 304 stainless steel. Cooking tank with AISI 304 stainless steel walls with 20/10 thickness, non-stick ceramic micro-sphere finishing and completely rounded angles. Radiating steel tank bottom with 10 mm thickness; externally welded. Distributing tap with large capacity neck placed on the top. Handwheel to lift the tank with a folding handle. Even heating at the bottom with stainless steel multi-flame burners, with thermocouple safety valve and protected pilot flame. Piezoelectric ignition with rubber protection. Control with a large precision thermostatic valve with temperature regulation from 100°C to 300°C. (Bertos Brand)
BERTOS GAS FRYER 20 LITERS
Worktop and front panels made of AISI 304 stainless steel. Stainless steel burners with an oval honeycomb section. Oval section large surface heat exchangers positioned directly in the tank to ensure fast and homogeneous heating. Pilot flame and thermocouple safety valve. Piezoelectric ignition button with rubber protection. AISI 304 stainless steel tank with large rounded edges and wide cold zone below the burners to decant the residual. The top with rounded edges integrates a board to rest baskets; it is slightly inclined to favor oil draining. Temperature control through a thermostatic valve from 110 to 190 °C with a more precise temperature detection, thanks to the sensors positioned in the tank. Safety thermostat with manual restart. Spherical draining tap positioned in the compartment controlled by an athermic handle.
Subscribe now for fresh content
Copyright @ 2023 Steel Kitchen by Abdullah Masoud All Rights Reserved.